Part Number: 6210-21-1710
BOLT
item weight .420 lbs
$34.76
Items Often Purchased with this Item:
| Part Number | Description |
|---|---|
| 6212-K2-9902 | GASKET SET,CYLINDER BLOCK L-M-NL6140 |
| 18-11026 | HOSE 2"ID X 4" 2 PLY |
| 6211-31-2410 | PIN |
| 22-40509 | Switch,Cooling System Pressure 4PSI N.O./ N.C. Isolated Ground 1/8NPT |
| 04065-05220 | SNAP RING |
| 6210-21-8000 | MAIN BEARING SET,STD W/ THRUST WASHERS 6140 |
| 6210-21-8050 | THRUST BEARING,STD.6140 SET OF 3 |
| 6215-41-4110 | INTAKE VALVE 6140 LATE STYLE(169.2mm OAL) USE IN PAIRS OF SAME # ONLY |
| 24-25002 | Air Filter Element 65-75 PPI L6140A-AL-AL2 |
| 07206-30710 | BANJO BOLT M10x1.25 X 20mm |
| 025100008 | SEALING WASHER,BONDED M8 |
| 07000-63025 | O-RING |
| 22-40904 | Switch,Temperature 205F N.O./ N.C. Isolated Ground 1/2NPT 3ea #8-32 Terminals |
| 6210-41-5420 | BUSHING |
| 18-52205 | HOSE 1/4"ID X 13" PUSH-ON |
| 18-75001 | HOSE 2-7/8"ID X 3-1/2" 3 PLY SILICONE |
| 6210-31-3310 | CS,12PT M16x1.5 X 90mm |
| 6211-31-3130 | BUSHING |
| 6210-11-1330 | VALVE SEAT, INTAKE |
| 24-20023 | Element,Crankase Breather Filter (High Efficiency CCV6000 |
| 22-40941 | Switch,Temperature 195F N.O./ N.C. Isolated Ground 3/8NPT (3ea #8-32 Terminals) |
| 24-21000 | Air Filter 8"OD X 8-3/4" (10-3/4"LOA)- 4-1/8"OD X 2" Outlet |
| 6136-41-4520 | VALVE KEEPER |
| 18-05000 | HOSE 7/8"ID X 2-3/4" 3 PLY SILICONE |
| 11-34804 | GASKET,TURBO MTG. (135mm X 92mm HOLE DIA. 11mm) |
| 04064-02212 | SNAP RING |
| 600-421-6630FS | THERMOSTAT 170F/76.5C (BLACK) |
| 6210-21-2230 | O-RING |
| 6210-21-2240 | O-RING |
| 6210-11-7710 | O-RING |
| 6210-41-4430 | VALVE SPRING,OUTER 6140 NEW |
| 6210-71-1140 | WASHER |
| 6210-41-4440 | VALVE SPRING,INNER 6140 NEW |
| 6210-71-1160 | GASKET |
| 6150-21-3230 | SEAL |
| 6210-41-4510 | .4RETAINER |
| 22-42802 | Sender,Temperature 250F Isolated Ground 1/2NPT |
| 40-45003 | DRIVE BELT 11/16" X 32-3/4" |
| 00-04803 | Wear Sleeve,Crankshaft Repair Type (Front) 6125 & 6140 |
| 24-55001 | FUEL FILTER 6140/6170 (6 PER CASE) |
| 29-05000 | GASKET KIT,CYLINDER HEAD L-M6140 FROM KOMATSU S/N 17628 (NON-RETURNABLE IF OPENED) |
| 6215-41-4212 | EXHAUST VALVE (169.2mm OAL) |
| 6210-41-5302 | SHAFT ASSY |
| 6210-11-1321 | VALVE SEAT INSERT,EXHAUST STANDARD |
| 25-15024 | SHAFT |
| 25-15026 | CAM |
| 25-15036 | SEAL ASSEMBLY |
| 25-15037 | BALL BEARING,DOUBLE ROW ANGULAR CONTACT UNSEALED |
| 25-15039 | LOCK NUT, TAB M28x1.5 |
| 25-15041 | TAB WASHER |
| 6215-11-6560 | BANJO BOLT, M10x1.25 X 35mm DOUBLE LENGTH |
| 6212-41-4540 | VALVE STEM SEAL,EXHAUST |
| 6212-16-1440 | VALVE GUIDES |
| 6210-11-7830 | GASKET,ROCKER ARM HOUSING 6140 (LATE) & 12V140 |
| 07003-01015 | SEALING WASHER,COPPER M10 |
| 01438-01020 | CS,12PT M10x1.5 X 120mm |
| 6210-32-3040 | ROD BEARING,STD |
| 6211-11-1103 | CYLINDER HEAD SUB-ASSY WITH PLUGS,GUIDES & SEATS L-M6140 (LATE) MARKED 6211-11-1112 |
| 6210-21-2270 | SEAL |
| 01643-21845 | FLAT WASHER M18 |
| 07000-F2021 | O-RING |
| 6212-K6-9902 | GASKET KIT,COOLANT PUMP REPAIR L-M6140 |
| 6211-22-2220 | LINER, NL6140 |
| 6212-31-2170 | PISTON |
| 6210-21-1491 | CAM BUSHING |
| 22-40914 | Switch,Temperature 240F N.O./ N.C. Isolated Ground 3/8NPT |
| 6211-31-2050 | PISTON RING SET |
| 6150-41-5541 | SCREW |