Part Number | Description |
6212-K2-9902 |
GASKET SET,CYLINDER BLOCK L-M-NL6140 |
18-11010 |
Hose 3/4"ID X 4-1/4" 3-Ply Silicone |
21-00132 |
BUSHING,BRS. 1/4NPT X 1/8NPT |
24-09501 |
Oil Filter 1064 & 1066 (6ea Per Case) |
27-39513 |
Elbow,Wet Exhaust 4" S/S (Cast) K26 Turbo V-Flange Pattern |
22-41079 |
Solenoid 24VDC 85A N.O. Isolated Ground |
22-40963 |
Switch,Pressure 15PSI N.O./ N.C. 1/8NPT 10A Contacts |
22-41668 |
Starter 24V 7kW Isolated Ground L.H. 3-Bolt SAE Type #1 Mount |
16-01000 |
O-Ring 3/4"ID X 3/32" Nitrile |
11-10015 |
Sealing Ring, Thermostat |
21-00025 |
Hose Union 90,PVC 3/4"HB X 3/4"HB |
22-42802 |
Sender,Temperature 250F Isolated Ground 1/2NPT |
16-15005 |
O-Ring 1/2"ID X 3/32" Nitrile |
16-14804 |
O-Ring 2"ID X 1/8" Nitrile |
25-15705 |
End Cover,Raw Water Pump 4-Hole "Lugger / Northern Lights" (127mmOD) |
25-15706 |
Wear Plate |
25-15708 |
Ball Bearing 20mmID X 47mmOD X 14mm Single Row Deep Groove Double Seal |
18-75701 |
Hose Assy 1/2"ID X 32" 1/2FMS X 1/2FMS |
29-05000 |
GASKET KIT,CYLINDER HEAD L-M6140 FROM KOMATSU S/N 17628 (NON-RETURNABLE IF OPENED) |
22-40277 |
Alternator 24V/75A Isolated Ground Large Frame (with Adjustable Regulator) |
22-40912 |
SENDER,TEMPERATURE 250F STD GROUND M14x1.5 |
11-79501 |
Gasket,Oil Filler Neck & Block-Off Plate Mtg |
32-00005 |
Cotter Pin S/S 1/8" X 1-1/4" ANSI B18.8.1-R1977 |
27-09601 |
Tube Assy,Turbo Oil Supply |
21-09601 |
BUSHING,STL. 1/2NPT X M14x1.5 |
23-59601 |
Bracket,Alarm Tank Mtg |
22-40439 |
Speed Sensor 3/4-16 X 2-1/4" (Metri-Pak 150.2 Connector) |
25-19521 |
SEAL,LIP TYPE OIL VITON |
25-19524 |
SHAFT,RAW WATER PUMP |
25-19526 |
Shaft Seal (Carbon / Ceramic) |
18-29501 |
HUMP HOSE 4-1/8"ID X 2"ID X 4-3/4" LOA (OFFSET) WITH 11/16"ID VENT HOLE |
21-09513 |
F.Bulkhead Union,STL. 3/8NPT |