Part Number: 19-01010
Hose Clamp #10 Extended Band S/S (316) 3/4" Min X 1-1/16" Max
item weight 0.040 lbs
$5.06
Items Often Purchased with this Item:
| Part Number | Description |
|---|---|
| 18-11201 | Hose,Heat Exchanger Outlet 1-1/2"ID Molded for M944 ALL |
| 18-11202 | Hose 3/4"ID X 1-3/4" 3-Ply Silicone |
| 18-11203 | Hose,Raw Water Pump Outlet Molded for M944 ALL |
| 25-11202 | Raw Water Pump L-M944-M30CW-M944T-M38CR2-M944T3-M40C3 |
| 18-21201 | Hose,Air Intake 2-3/8"ID X 2"ID Molded for M944W/W3F |
| 12-09723 | CS,HX HD M8x1.25 X 115mm S/S (316) ISO 4017 GRADE 4.8T |
| 24-01201 | Oil Filter L-M-NL944 Tier 2 & 3 (12ea Per Case) |
| 29-01200 | Gasket Set,Engine Overhaul L-M944 & M30CW (Non-Returnable If Opened) |
| 19-11206 | HOSE CLAMP #6/8 TYPE "M" S/S |
| 18-11204 | Hose 3/4"ID X 44" Wire Reinforced |
| 10-11202 | Thermostat Housing L-M944 |
| 32A3510012 | OIL PUMP M944 |
| 3446109050 | Fuel Lift Pump with O-Ring M944W & W3 - M30CW & CW3 - NL944D3 |
| 32A1708300 | PISTON PIN M944 & T |
| F320203000 | SNAP RING M944 |
| 32A1900501 | CONNECTING ROD BUSHING M944 |
| 32A0513100 | PUSH ROD M944 |
| F180508016 | CS,HX HD WITH WASHER M8x1.5 X 16mm PLATED |
| 32A0101600 | VALVE GUIDES M944 |
| 32A0103100 | VALVE SEAT-INTAKE M944 |
| 32A0103200 | VALVE SEAT-EXHAUST M944 |
| 32A0101400 | CYLINDER HEAD BOLTS M944 |
| 3440402901 | VALVE COTTER M944 |
| 32C0404501 | ROCKER ARM SPRING M944 |
| 32A0422010 | ROCKER ARM ASSEMBLY |
| 32A6104100 | FUEL LEAK OFF TUBE M944 |
| 22-40938 | Switch,Temperature 210F N.O./ N.C Isolated Ground 3/8NPT |
| MD008784 | CAP,OIL FILLER ALL 944 |
| 20-11202W | Heat Exchanger Assy CU-NI (White) L-M944D-T |
| 32A6603101 | GLOW PLUG 12V L944D - M944W-W3 - M30CW-CW3 - NL944D2-D3 |
| 21-31624 | PLUG,HX HD,BRS. 1/4NPT |
| 28-12201 | Heat Exchanger End Cover Assy 3" with Gasket & Fastener (13/32" Hole) |
| 27-35400 | Elbow,Wet Exhaust 3" Cast Iron |
| 3061910502 | CONNECTOR ROD NUT M944 |
| 21-12010 | Zinc Anode 3/8"OD X 1-3/4" X 5/16-18 Thread |
| 18-00130 | Hose 5/16"ID X 30" Polyvinyl |
| 25-11011 | Impeller Kit (Includes Cover Gaskets & O-Ring) |
| 35-11000 | Thermostat 180F / 82C 52mm OD S/S (Rubber Poppet Seat) |
| 19-00010 | Hose Clamp #10 S/S |
| 22-44810 | Sender,Temperature 250F Isolated Ground 3/8NPT |
| 19-00024 | Hose Clamp #24 S/S |
| 11-12203 | Gasket,Keel Cooling Outlet / Heat Exchanger Mtg |
| 11-10015 | Sealing Ring, Thermostat |
| 11-35401 | Gasket,Exhaust Elbow Mtg |
| 22-42803 | Sender,Pressure 0-80 PSI Isolated Ground 1/8NPT (Marked 32/1) |
| 40-05404 | Drive Belt 1/2" X 46-3/8" |
| 15-00706 | Flat Washer M8 S/S (316) DIN Code 125-A4 |
| 22-40236 | Switch,Pressure 15PSI,N.C. 1/8NPT Isolated Ground |
| 20-17301 | Cap,Rubber 3/8"ID X 1-1/8"LOA |
| 21-12012 | PLUG,SKT HD,STL. 1/2BSPT |
| 21-12013 | Filler Cap 7PSI Double Seal Coolant Recovery Type |
| 22-42070 | Switch & Harness Assembly 12", High Exhaust Temperature 205F N.O. |