Part Number: 011511025
CS,HX HD WITH LOCK WASHER M10x1.5 X 25mm
item weight 0.060 lbs
$5.92
Items Often Purchased with this Item:
| Part Number | Description |
|---|---|
| 11-25400 | GASKET,INTAKE MANIFOLD MTG. |
| 33-83108 | Mount,Plateform 155 LB |
| 21-71045 | F.SWIVEL,BRS. 1/4-45T X 1/4HB (Push-On) (Universal Seat) |
| 21-71048 | F.SWIVEL,BRS. 5/16-45T X 1/4HB (Push-On) (Universal Seat) |
| 11-15401 | GASKET,THERMOSTAT HOUSING |
| 198116230 | CHECK VALVE STOPPER 643 / 673 / 673L |
| 052100400 | O-RING |
| 130326051 | SEALING WASHER, M14 |
| 052300400 | O-RING NITRILE |
| 25-12004 | REPAIR KIT FOR RAW WATER PUMPS 25-12057 & 25-15405 |
| 131017921 | INJECTION PUMP ASSY M773L & TIER 2 & 3 |
| 25-12059 | SHAFT,RAW WATER PUMP |
| 25-12060 | Impeller Kit with Gasket & O-Ring Seals (6 PER CASE) |
| 25-12061 | CAM,RAW WATER PUMP |
| 25-12062 | WEAR PLATE,RAW WATER PUMP |
| 198517602 | ROD BEARING,STD.773L |
| 25-12064 | BEARING,RAW WATER PUMP |
| 25-12065 | SEAL,LIP TYPE |
| 25-12067 | O-Ring 2-3/8"ID X 1/16" Nitrile |
| 25-12068 | SNAP RING,RAW WATER PUMP |
| 25-12069 | SNAP RING,RAW WATER PUMP |
| 25-12070 | WASHER,RAW WATER PUMP |
| 130556480 | PIPE |
| 130556500 | PIPE |
| 064100045 | EXPANSION PLUG 45mm |
| 040106203 | CAM BEARING 753-773 |
| 140116140 | COVER |
| 130516092 | BANJO BOLT M8x1.25 X 22mm |
| 025100006 | SEALING WASHER,BONDED M6 |
| 198517572 | MAIN BEARING |
| 198517582 | LOWER MAIN BEARING |
| 120216041 | VALVE CAP |
| 052300700 | O-RING 70mmID X 3.1mm Nitrile |
| 130306190 | FUEL FILTER HEAD ASSEMBLY 5-20kW ISM |
| 130506140 | FUEL LIFT PUMP 643-753-843N-844-844L |
| 020800018 | NUT, 753 |
| 199286150 | SHIM, O.1mm 753 |
| 199286160 | SHIM, 0.15mm 753 |
| 199286170 | SHIM, .20mm 753 |
| 198517592 | BUSHING STD |
| 036500021 | SNAP RING-753 |
| 41-01011 | Hose 1/4"ID 250 PSI -40 TO +200 F MSHA Push-On (Bulk) |
| 37-40011 | Temperature Gauge 0-250F / 120C 12V Black Bezel Cockpit International |
| 37-40012 | Voltmeter 12VDC Black Bezel Cockpit International |
| 010109340 | CS,HX HD FLANGED M10x1.25 X 28.75mm GRADE 12T |
| 199266180 | THRUST WASHER |
| 12-11002 | CS,HX HD 3/8-16 X 3/4" S/S (316) |
| 064209055 | EXPANSION PLUG 40mm |
| 110666060 | ELEMENT,ROCKER COVER BREATHER FILTER |
| 18-75400 | HOSE ASSY 1/2"ID X 18-1/2" 1/2FMS X 1/2NPT MALE RIGID |
| 198486780 | BANJO BOLT M8x1.25 x 18mm |
| 198636140 | CRANKSHAFT SEAL,FRONT (WITH WEAR SLEEVE) |
| 052109076 | O-RING 643, 753 |
| 048100010 | BALL,CHECK VALVE |
| 17-10054 | Expansion Plug,Brass 1-1/4" Shallow Cup |
| 56-60002 | Ball Bearing Single Row Deep Groove with Snap Ring Groove Unsealed |
| 130436011 | BANJO BOLT M14x1.5 X 26mm |
| 56-60003 | Ball Bearing 35mmID X 72mmOD X 17mm Single Row Deep Groove Unsealed |
| 11-31902 | Gasket,Exhaust Outlet (50mm Bolt Hole Pattern) |
| 21-80002 | F.SWIVEL.STL. 1/4HB X 1/4-37T PUSH-ON (UNIVERSAL SEAT) |
| 120226070 | VALVE KEEPER |
| 20-12012 | Gasket 3" Rubber - Heat Exchanger End Cover Seal |
| 15-00702 | Lock Washer,Helical M8 DIN Code 127B |
| 115326231 | PIN, PISTON |
| 22-42014 | Switch,High Exhaust Temperature 205F N.O. #6-32 UNC-2A |
| 15-00805 | Flat Washer M10 DIN Code 125-A |
| 22-42047 | Relay,SPDT 12VDC 50A |
| 22-42054 | Stop Solenoid 12V |
| 140166131 | ROTOR |
| 199236540 | COLLAR |
| 131236190 | Banjo Bolt M10x1.0 x 20mm Tapped M6x1.0 |
| 120406050 | INTAKE, VALVE GUIDE SEAL |
| 11-12005 | Gasket,Raw Water Pump Mtg |
| 115017461 | PISTON KIT,STD M773L TIER 2 |
| 120406070 | EXHAUST, VALVE GUIDE SEAL |
| 145536370 | END CAP,HEAT EXCHANGER & MANIFOLD 753 - 843N - 844 |
| 15-00040 | Snubbing Washer S/S (316) 0.531"ID X 2.88"OD X 0.120" +/- 0.05" |
| 35-11000 | Thermostat 180F / 82C 52mm OD S/S (Rubber Poppet Seat) |
| 198216700 | VALVE SPRING |
| 18-15401 | Hose 1"ID X 5-1/4" 3-Ply Silicone |
| 18-15402 | HOSE,1-1/2"ID H.E.OUTLET MOLDED FOR M864 |
| 11-75401 | Gasket SAE "A" Pad |
| 130396030 | VENT PLUG M14x1.5 X 10mm (19mm HEX) |
| 198216720 | SPRING |
| 131426200 | GASKET,INJECTOR SEALING |
| 19-00020 | Hose Clamp #20 S/S |
| 11-12203 | Gasket,Keel Cooling Outlet / Heat Exchanger Mtg |
| 120186080 | RETAINER |
| 198216821 | SPRING |
| 24-52020 | Fuel Filter 4 Micron (Case Qty = 12ea) |
| 036800010 | SNAP RING |
| 120176250 | VALVE, EXHAUST |
| 131606250 | LINE, FUEL RETURN 753 |
| 11-10015 | Sealing Ring, Thermostat |
| 21-10002 | Drain Cock,Brass 1/4NPT (Counterclockwise-to-Open) |
| 140166130 | OIL PUMP ROTOR |
| 11-35401 | Gasket,Exhaust Elbow Mtg |
| 052100100 | O-RING-753 |
| 00-13101 | Spring, Thermostat Retainer |
| 16-15401 | O-Ring 2-1/2"ID X 3/32" Nitrile |
| 18-15404 | HOSE 3/4"ID X 5-3/4" 1 PLY |
| 16-13101 | O-Ring 2-1/2"ID X 1/8" Nitrile |
| 18-35404 | Hose 3/4"ID X 46" Wire Reinforced |
| 010109235 | MSCR PHILLIPS WITH LOCK WASHER M6x1.0 X 14mm |
| 052100120 | O-RING |
| 37-40015 | OIL PRESSURE GAUGE 0-150 PSI / 10 BAR 12V COCKPIT INT'L BLACK BEZEL |
| 145206022 | THERMOSTAT 180F / 82C 8KW TO 20KW |
| 25-15714 | O-Ring 1/4"ID X 1/16" Nitrile |
| 198517120 | BUSHING |
| 12-00776 | CS,HX HD M8x1.25 X 20mm S/S (316) DIN Code 933-A4 |
| 15-00705 | LOCK WASHER,HELICAL M8 S/S (316) DIN CODE 127B-A4 |
| 22-45403 | STARTER 12V/2.5kW ISO GROUND (MODIFIED) M984 |
| 198487590 | BANJO BOLT M8x1.25 x 18mm TAPPED 1/8NPT FEMALE |
| 26-55404 | FUEL LIFT PUMP ASSY WITH PRIMER PUMP M984 & M964 |
| 27-32003 | Elbow,Wet Exhaust 2" S/S (316) with Single 1/2"NPT Plug M773LW - M843NW- M844W - M844LW |
| 131426300 | SHIM SET 643-673-753 / TIMMING ADJUSTMENT SHIMS |
| 22-40236 | Switch,Pressure 15PSI,N.C. 1/8NPT Isolated Ground |
| 140996270 | SEALING WASHER M10 (METAL / FIBRE COMPOSITE) |
| 140996260 | SEALING WASHER M8 (METAL / FIBRE COMPOSITE) |
| 14-00816 | Hex Nut M10x1.25 (14mm Hex X 8mm High) ISO Class 8 / JIS B1181 Zinc Plated |
| 052109078 | O-RING |
| 00-05408 | Wear Sleeve,Crankshaft Repair Type (Rear) 864 - 964 - 984 |
| 15-09007 | Flat Washer M12 S/S (316) DIN Code 125-A4 |
| 21-12014 | M.CONN.BRS. 3/8NPT X 1/2HB (Beaded Barb) |
| 11-18602 | Gasket,Thermostat Cover |
| 11-08601 | Gasket,Exhaust Manifold / Expansion Tank Mtg |
| 24-28601 | Screen,Air Filter Retaining |
| 135996930 | GASKET,INTAKE MANIFOLD 773L |
| 135996940 | GASKET |
| 18-28601 | Hose,Air Intake 1"ID Molded for M773 |
| 130556681 | BANJO FITTING,FUEL PUMP INLET M8 X 5/16-37T |
| 131406340 | FUEL INJECTOR 773L - 753-2 - 773L2 |
| 052109099 | GASKET,ROCKER ARM COVER |
| 052109101 | GASKET, ROCKER ARM BOX(773) |
| 111147560 | HEAD GASKET 773L (1.2) |
| 111147570 | HEAD GASKET 773L (1.3) |
| 115017460 | PISTON KIT,STD M773L TIER 2 |
| 050209107 | REAR MAIN SEAL 773L |
| 110996800 | OIL PAN GASKET 753 & 773L |
| 145996830 | WATER PUMP GASKET 773L & 753-2 |
| 165996520 | GASKET,FRONT PLATE M753/ M773L |
| 165996530 | GEAR CASE GASKET 773L |
| 115107900 | RING SET STD. 773L |
| 120166360 | INTAKE VALVE 773L & 753-2 |
| 145017910 | COOLANT PUMP M773L & M753-2 TIER 2 (WHITE) |
| 131606880 | TUBE ASSY,FUEL RETURN 773L |
| 11-35402 | GASKET,EXHAUST MANIFOLD MTG |
| 140036141 | CHECK VALVE ASSY 773 & 773-2 and 3 |
| 110136300 | INTAKE VALVE SEAT |
| 131236280 | VENT SCREW |
| 110136280 | EXHAUST VALVE SEAT |
| 130996130 | GASKET,FUEL FEED PUMP MTG |
| 115017450 | PISTON KIT M773L & TIER2&3 0.50MM O.S. |
| 115026340 | CONNECTING ROD ASSY |
| 130556920 | TUBE,FUEL FILTER OUTLET |