Part Number: 120016050
CAMGEAR
item weight 2.010 lbs
$101.08
Items Often Purchased with this Item:
| Part Number | Description |
|---|---|
| 140546020 | NIPPLE,OIL FILTER MTG 3/4-16 X 0.80" |
| 120996140 | ROCKER BOX GASKET M843NW2 TIER 2 |
| 198517242 | BEARING, MAIN LOWER HALF STD |
| 111010590 | CYLINDER HEAD ASSEMBLY M843 TIER 2. |
| 29-03101 | GASKET SET,ENGINE OVERHAUL M843N TIER 2 (NON-RETURNABLE IF OPENED) |
| 165296132 | SHAFT,IDLER GEAR |
| 198517222 | BUSHING,STD. |
| 130326051 | SEALING WASHER, M14 |
| 199106021 | CLAMP,FUEL PIPE |
| 115017541 | PISTON KIT,STD 843-844 TIER 2 |
| 011310660 | CS,HX HD WITH LOCK WASHER M6x1.0 X 60mm JIS 7T |
| 130516069 | SEALING WASHER,COPPER M8 |
| 025100012 | SEALING WASHER, BONDED M12 |
| 130306190 | FUEL FILTER HEAD ASSEMBLY 5-20kW ISM |
| 398210070 | SPRING, 643 |
| 131296255 | SEALING WASHER M12 |
| 198486770 | BUSHING,STL.3/4BSPT X 1/4BSPT |
| 198486780 | BANJO BOLT M8x1.25 x 18mm |
| 052109076 | O-RING 643, 753 |
| 199216230 | SPACER |
| 199236540 | COLLAR |
| 198216720 | SPRING |
| 026200010 | SEALING WASHER |
| 011140616 | CS,HX HD W/WASHER M6x1.0 X 16mm |
| 198217040 | SPRING |
| 036800010 | SNAP RING |
| 10-33110 | Exhaust Manifold / Expansion Tank |
| 198736050 | DRAIN COCK,BRS.1/4BSPT |
| 125256120 | SLIDER, 643-753-843N |
| 198636170 | SEAL,REAR MAIN 843N-844 |
| 198416320 | DIPSTICK |
| 199266200 | THRUST WASHER |
| 165026120 | ROTOR IDLER ASSY 40mmID 843-844 Up to Tier 2 |
| 185606170 | WIRE HARNESS(GLOW PLUG) |
| 130556690 | PIPE, FUEL FILT. TO LIFT PUMP |
| 131606451 | LINE, FUEL RETURN 843N TIER 3 & 4 |
| 130556701 | PIPE,FILTER TO INJECTION PUMP 843N |
| 185436120 | PULLEY/FAN ASSEMBLY |
| 198487590 | BANJO BOLT M8x1.25 x 18mm TAPPED 1/8NPT FEMALE |
| 110156360 | BEARING HOLDER ASSEMBLY |
| 110156370 | BEARING HOLDER ASSEMBLY |
| 110156380 | BEARING HOLDER ASSEMBLY |
| 110156390 | BEARING HOLDER ASSEMBLY |
| 120026320 | CAMSHAFT ASSY |
| 111017450 | CYLINDER HEAD ASSY 844 Pre-Tier |
| 120166290 | VALVE, INTAKE |
| 198217170 | SPRING |
| 140036220 | RELIEF VALVE ASSY / OIL PRESSURE REGULATOR |
| 115276200 | GEAR, CRANKSHAFT |
| 131507450 | INJECTION LINE #1 M844 & TIER 2-3 |
| 131507460 | INJECTION LINE #2 M844 & TIER 2-3 |
| 131507470 | INJECTION LINE #3 M844 & TIER 2-3 |
| 125046170 | GOVERNOR LEVER ASSY |
| 131426310 | SHIM SET 843N |
| 131446074 | INJECTOR SPRING |
| 185446162 | STATOR ASSEMBLY |
| 125116140 | GOVERNOR SHAFT |
| 131296531 | SEAT SPRING |
| 131446075 | SEAT SPRING |
| 131156260 | VALVE, DELIVERY |
| 131176320 | SPRING PLUNGER |
| 131446076 | SPACER |
| 111136490 | HEAD BOLT M11x1.25 X 72mm (14mm HEX) |
| 130556681 | BANJO FITTING,FUEL PUMP INLET M8 X 5/16-37T |
| 111147501 | HEAD GASKET 1.4mm 843N |
| 135996950 | GASKET,AIR INTAKE MTG |
| 110996820 | GASKET,OIL PAN MTG 843N |