Part Number: 19-59401
CLAMP ASSY,2 LINES
item weight 0.120 lbs
$81.88
Items Often Purchased with this Item:
| Part Number | Description |
|---|---|
| 27-59413 | TUBE,FUEL RETURN TO ALARM TANK |
| 21-59516 | BANJO BOLT, M8x0.75 X 27mm DOUBLE LENGTH |
| 27-59506 | TUBE,FUEL RETURN TO ALARM TANK |
| 27-59421 | Injection Line #1 Double Wall (Marked #1) DE10 |
| 27-59422 | Injection Line #2 Double Wall (Marked #2) DE10 |
| 27-59423 | Injection Line #3 Double Wall (Marked #3) DE10 |
| 27-59424 | Injection Line #4 Double Wall (Marked #4) DE10 |
| RE507850 | PISTON & LINER KIT (use circlip R54114)(Piston Marked RE509540) |
| 24-09501 | Oil Filter 1064 & 1066 (6ea Per Case) |
| 12-00223 | CS,HX HD 5/16-18 X 3/4" S/S (18-8) |
| 27-39513 | Elbow,Wet Exhaust 4" S/S (Cast) K26 Turbo V-Flange Pattern |
| RE531436 | FUEL INJECTOR |
| 12-00311 | CS,HX HD 3/8-16 X 3/4" Grade 5 |
| 12-00313 | CS,HX HD 3/8-16 X 1-1/4" Grade 5 |
| R504734 | O-Ring 1-1/2"ID X 1/8" 60 Durometer Nitrile |
| 11-11013 | Gasket,Thermostat Cover Mtg |
| 11-11023 | Gasket,Expansion Tank-to-Exhaust Manifold |
| 35-12500 | Thermostat 169F / 76C 52mm OD S/S (Rubber Poppet Seat) |
| 11-11043 | Gasket,Heat Exchanger / Keel Cooler Outlet connection |
| 15-00300 | Flat Washer M10 (18mmOD X 10.5mmID X 1.6mm) DIN Code 433 A4 / ISO 7092 Small OD |
| 15-00301 | FLAT WASHER 3/8" USS ZINC PLATED ANSI TYPE A (WIDE) |
| 15-00302 | Lock Washer,Helical 3/8" |
| 24-21000 | Air Filter 8"OD X 8-3/4" (10-3/4"LOA)- 4-1/8"OD X 2" Outlet |
| RE546917 | COOLANT PUMP,CAST IRON (LOW FLOW) 445 - 1064D-T-A |
| 131426160 | SEALING WASHER,COPPER M8 |
| 19-00036 | Hose Clamp #36 S/S |
| 19-00072 | Hose Clamp #72 S/S |
| 19-00128 | Hose Clamp #128 S/S |
| 24-51007 | Element,Fuel Filter 2 Micron 4.3" with Plastic Drain Valve M1064T2 - L-M1066T DE10 & M1064H HPCR |
| 13-34801 | STUD M10x1.5 X 35mm (47mm LOA) Grade 8.8 DIN Code 939-10 |
| 11-10015 | Sealing Ring, Thermostat |
| DZ110618 | FUEL LIFT PUMP ASSEMBLY POWERTECH 4/6 CYL 2 VALVE |
| AR65507 | PACKING KIT |
| DZ110052 | REPAIR KIT,HIGH FLOW COOLANT PUMP (RE505980 - CAST IRON & RE500734 - ALUMINUM) |
| DZ110417 | PISTON & LINER KIT |
| RE31617 | SEALS |
| 21-55703 | COMPRESSION UNION,STL. 8mm SERIES L (WITH NUTS & SLEEVES) |
| R123353 | GASKET,OIL PAN MTG 4045 POWERTECH |
| 16-19501 | O-RING 4-1/2"ID X 1/8" VITON |
| 25-19501 | Raw Water Pump 1-1/4"HB In / Out |
| 27-09401 | Tube Assy,Turbocharger Oil Supply MP445T - M1064T1-T2-A-H |
| 14-00810 | Hex Nut M10x1.5 (14mm Hex) JIS B1181 Class 10 |
| R135101 | GEAR,RAW WATER PUMP DRIVE (TAPER FIT) |
| R501428 | GASKET,OIL COOLER COVER |
| 32-00005 | Cotter Pin S/S 1/8" X 1-1/4" ANSI B18.8.1-R1977 |
| 15-19503 | Shaft Flat Washer M20 DIN Code 1440 Unplated |
| 14-19501 | HEX NUT,SLOTTED,STANDARD 3/4-16 GRADE 5 ANSI B18.2.2-1972 UNPLATED |
| 25-19516 | FLANGE,RAW WATER PUMP |
| RE500539 | IDLER SHAFT & BEARING HOUSING ASSY STD (HSG MARKED R500304) |
| RE65908 | ROD BEARING,STD |
| R123501 | GASKET,OIL COOLER |
| T122075 | O-RING 1-3/8" X 3/32" NITRILE |
| 19-50012 | CLAMP ASSY,2 LINES |
| 19-50014 | CLAMP ASSY,4 LINES |
| RE65165 | MAIN BEARING KIT,STD |
| RE65168 | THRUST BEARING KIT,STD |
| RE507852 | PISTON RING KIT |
| 18-59508 | HOSE ASSY 1/4"ID X 23-5/8" S/S-TFE 8mm X 8mm90 LIGHT STANDPIPE |