Part Number | Description |
27-59512 |
Double Wall Injection Line #1 & #2 HPCR (Marked #1) |
27-59534 |
Double Wall Injection Line #3 & #4 HPCR (Marked #2) |
27-59504 |
Tube Assy,HPCR Manifold Inlet #1 Double Wall (Marked #4) |
27-59505 |
Tube Assy,HPCR Manifold Inlet #2 Double Wall (Marked #5) |
27-59620 |
Tube,Fuel Return-to-Alarm Tank |
25-19531 |
Repair Kit for Raw Water Pump 25-19522 |
24-09501 |
Oil Filter 1064 & 1066 (6ea Per Case) |
33-81013 |
Hydrolastic Mount 500 LBS |
22-40904 |
Switch,Temperature 205F N.O./ N.C. Isolated Ground 1/2NPT 3ea #8-32 Terminals |
22-41079 |
Solenoid 24VDC 85A N.O. Isolated Ground |
11-11013 |
Gasket,Thermostat Cover Mtg |
35-12500 |
Thermostat 169F / 76C 52mm OD S/S (Rubber Poppet Seat) |
R521458 |
BOLT,ROCKER ARM RETAINING (TAPPED M8x1.25) |
11-11043 |
Gasket,Heat Exchanger / Keel Cooler Outlet connection |
18-62520 |
Hose 1-3/4"ID X 3-3/4" 3-Ply Silcone |
24-21000 |
Air Filter 8"OD X 8-3/4" (10-3/4"LOA)- 4-1/8"OD X 2" Outlet |
35-11000 |
Thermostat 180F / 82C 52mm OD S/S (Rubber Poppet Seat) |
24-51008 |
Element,Fuel filter 2 Micron with Plastic Drain Valve 6" L-M1066H HPCR System |
24-51009 |
Element,Water Separator 30 Micron Reverse Flow 6" with Plastic Drain Valve L-M1066H & NL1066H4 HPCR System |
16-01000 |
O-Ring 3/4"ID X 3/32" Nitrile |
11-10015 |
Sealing Ring, Thermostat |
21-10000 |
PLUG,HX HD,BRS.1/2NPT x 7/16-14 (ZINC HOLDER) |
21-10010 |
Zinc Anode 5/8"OD X 2" X 7/16-14 Thread |
22-42803 |
Sender,Pressure 0-80 PSI Isolated Ground 1/8NPT (Marked 32/1) |
16-14804 |
O-Ring 2"ID X 1/8" Nitrile |
16-25701 |
O-RING 2-7/8"ID X 3/16" VITON |
24-05701 |
Oil Filter L-M-NL6108 & All NLI Models built with Integrated Duplex Oil Filter (12ea per Case) |
25-15704 |
Impeller Kit with Cover O-Ring Seal |
15-55701 |
SEALING WASHER,BONDED 1/8BSPP |
22-40357 |
Switch,Pressure 25PSI N.O./ N.C. 10A Contacts 1/8NPT |
16-19501 |
O-RING 4-1/2"ID X 1/8" VITON |
11-79501 |
Gasket,Oil Filler Neck & Block-Off Plate Mtg |
16-19503 |
O-Ring 4-1/4"ID X 3/32" Nitrile |
22-49508 |
Starter 24V 7.8kW Isolated Ground L.H. 3-Bolt SAE Type #1 Mount |
22-40467 |
A.C. Voltage Regulator AVC63-12B1 |
761393-06 |
Fuse 5A 250VAC 1/4 X 1-1/4 TO GENSET |
27-19510 |
Tube,Heat Exchanger Inlet S/S (316L) 2"HB X 2"HB L-M1064H & L-M1066H |
16-09601 |
O-RING 17"ID X 1/8" VITON |
16-09504 |
O-Ring 7-1/2"ID X 1/8" Viton |
25-19522 |
Raw Water Pump & Adapter Assy |
25-19526 |
Shaft Seal (Carbon / Ceramic) |
18-29501 |
HUMP HOSE 4-1/8"ID X 2"ID X 4-3/4" LOA (OFFSET) WITH 11/16"ID VENT HOLE |
29-09602 |
Gasket Set,Engine Overhaul L-M1066H (Non-Returnable If Opened) |