Part Number: R521458
BOLT,ROCKER ARM RETAINING (TAPPED M8x1.25)
item weight 0.140 lbs
$12.51
Items Often Purchased with this Item:
| Part Number | Description |
|---|---|
| R505480 | GASKET,WATER PORT |
| 27-59512 | Double Wall Injection Line #1 & #2 HPCR (Marked #1) |
| 27-59534 | Double Wall Injection Line #3 & #4 HPCR (Marked #2) |
| 27-59656 | Double Wall Injection Line #5 & #6 HPCR (MARKED #3) HPCR |
| 27-59504 | Tube Assy,HPCR Manifold Inlet #1 Double Wall (Marked #4) |
| 27-59505 | Tube Assy,HPCR Manifold Inlet #2 Double Wall (Marked #5) |
| 27-59620 | Tube,Fuel Return-to-Alarm Tank |
| 22-49509 | Engine Wire Harness CAN-BUS & HPCR Controller M1064H - M1066H |
| RE509794 | FUEL FILTER HEAD ASSEMBLY |
| RE516228 | PISTON & LINER KIT (Piston Marked RE507758) |
| RE519730 | FUEL INJECTOR,ELECTRONIC UNIT TYPE M1064H @ 1500RPM & L-M1066H - NL1066H4 ALL |
| 25-19531 | Repair Kit for Raw Water Pump 25-19522 |
| 24-09501 | Oil Filter 1064 & 1066 (6ea Per Case) |
| 33-81013 | Hydrolastic Mount 500 LBS |
| 33-81014 | Hydrolastic Mount 600LBS |
| 11-31012 | Gasket,Turbo Oil Return |
| 22-40922 | Switch,Temperature 215F N.O./ N.C. Isolated Ground 1/2NPT |
| R519292 | BOLT,ROCKER ARM RETAINING (TAPPED M6x1.0) |
| 12-99502 | CS, HX HD SPECIAL M8 x 1.25 x 78.8mm S/S |
| 11-21011 | Gasket,Intake Port |
| 11-11013 | Gasket,Thermostat Cover Mtg |
| 16-14801 | O-RING 199.3mm X 5.7mm 70 DUROMETER NITRILE |
| 16-14803 | O-RING 60mmID X 3mm 70 DUROMETER NITRILE |
| 11-11022 | Gasket,Filler Neck Mtg |
| 11-11023 | Gasket,Expansion Tank-to-Exhaust Manifold |
| 35-12500 | Thermostat 169F / 76C 52mm OD S/S (Rubber Poppet Seat) |
| 11-11043 | Gasket,Heat Exchanger / Keel Cooler Outlet connection |
| 11-31401 | Gasket,K26 Turbocharger Mounting (with Coolant Passage Penetrations) |
| 18-62520 | Hose 1-3/4"ID X 3-3/4" 3-Ply Silcone |
| 20-19504W | Heat Exchanger Assembly,CU-NI White L-M1064A-H & L-M1066A-H |
| 778717-0A | RECTIFIER ASSY 430 MAGNA-PLUS / MARINER |
| 16-00003 | O-Ring 1-5/8"ID X 1/8" Nitrile |
| 20-71406 | FAN 10" (BLOWER) 864CFM @ 0" 24V - 4.2 AMPS |
| R63185 | O-RING |
| 24-21000 | Air Filter 8"OD X 8-3/4" (10-3/4"LOA)- 4-1/8"OD X 2" Outlet |
| 20-19502W | End Cover,Heat Exchanger (NLI White) |
| R516140 | STRAP |
| 35-11000 | Thermostat 180F / 82C 52mm OD S/S (Rubber Poppet Seat) |
| 11-14804 | GASKET,HEAT EXCHANGER MTG |
| 11-30013 | Gasket,Exhaust Manifold Adapter Mtg |
| 24-51007 | Element,Fuel Filter 2 Micron 4.3" with Plastic Drain Valve M1064T2 - L-M1066T DE10 & M1064H HPCR |
| 24-51008 | Element,Fuel filter 2 Micron with Plastic Drain Valve 6" L-M1066H HPCR System |
| 24-51009 | Element,Water Separator 30 Micron Reverse Flow 6" with Plastic Drain Valve L-M1066H & NL1066H4 HPCR System |
| R541677 | VALVE BRIDGE 1066H |
| 16-01000 | O-Ring 3/4"ID X 3/32" Nitrile |
| 11-10015 | Sealing Ring, Thermostat |
| 21-10000 | PLUG,HX HD,BRS.1/2NPT x 7/16-14 (ZINC HOLDER) |
| 21-10010 | Zinc Anode 5/8"OD X 2" X 7/16-14 Thread |
| RE560752 | OIL COOLER, 668 POWERTECH |
| 22-40201 | SENDER,PRESSURE 0-150 PSI,ISO GROUND 1/8NPT (MARKED 32/14) |
| 11-31001 | GASKET, EXHAUST OUTLET - 4.5 L and 6.8 L DEERE |
| 16-15005 | O-Ring 1/2"ID X 3/32" Nitrile |
| DZ111102 | PUSH ROD |
| 16-14804 | O-Ring 2"ID X 1/8" Nitrile |
| 16-15004 | O-Ring 7/8"ID X 1/8" Nitrile |
| 16-25701 | O-RING 2-7/8"ID X 3/16" VITON |
| 11-15701 | GASKET,HEAT EXCHANGER INLET |
| 24-05701 | Oil Filter L-M-NL6108 & All NLI Models built with Integrated Duplex Oil Filter (12ea per Case) |
| 25-15704 | Impeller Kit with Cover O-Ring Seal |
| 25-15706 | Wear Plate |
| 15-00705 | LOCK WASHER,HELICAL M8 S/S (316) DIN CODE 127B-A4 |
| 11-51001 | GASKET |
| 9111241 | Ball Bearing 60mmID X 130mmOD X 31mm Single Row Deep Groove Double Shields |
| 21-05002 | Spacer,BP. 1/4 SCHD 40 X 0.35" |
| 00-00017 | Grommet 1/2"ID X 1"OD 1/8"GW X 3/4"GD X 3/8" |
| 15-70004 | Snubbing Washer S/S (304) 0.350"ID X 0.940"OD X 0.060" |
| 24-01002 | OIL FILTER-445-668 POWERTECH (12 PER CASE) |
| 16-19501 | O-RING 4-1/2"ID X 1/8" VITON |
| 11-79501 | Gasket,Oil Filler Neck & Block-Off Plate Mtg |
| 14-00810 | Hex Nut M10x1.5 (14mm Hex) JIS B1181 Class 10 |
| 12-09712 | CS,HX HD M8x1.25 X 25mm S/S (316) DIN Code 933-A4 |
| 27-59604 | INJECTION LINE #4 DOUBLE WALL (MARKED #3) |
| 24M7096 | WASHER M10 X 18MM |
| R123471 | HOUSING |
| 22-40467 | A.C. Voltage Regulator AVC63-12B1 |
| 13-00816 | STUD M10x1.5 X 50mm (62mm LOA) Grade 8.8 DIN Code 939-8 |
| 10-29503 | Cover,Charge Air Cooler with Inlet / Outlet Ports |
| 27-19510 | Tube,Heat Exchanger Inlet S/S (316L) 2"HB X 2"HB L-M1064H & L-M1066H |
| 16-09601 | O-RING 17"ID X 1/8" VITON |
| 16-09401 | O-RING 12"ID X 1/8" VITON |
| 25-19522 | Raw Water Pump & Adapter Assy |
| R515030 | GASKET,INTAKE MANIFOLD 1066 4V |
| 865873-01 | O-RING |
| 18-29501 | HUMP HOSE 4-1/8"ID X 2"ID X 4-3/4" LOA (OFFSET) WITH 11/16"ID VENT HOLE |
| 29-09602 | Gasket Set,Engine Overhaul L-M1066H (Non-Returnable If Opened) |
| 20-29600 | Charge Air Cooler Sub-Assembly 1066A-H |