Part Number: RE553419
CYLINDER HEAD ASSEMBLY L-M1066H AND NL1066H4 See Application Comments
item weight 175.000 lbs
$8,260.51
Items Often Purchased with this Item:
| Part Number | Description |
|---|---|
| RE507959 | INJECTION PUMP,HPCR 1064/1066 CORE CREDIT VALUE $400.00) |
| R505480 | GASKET,WATER PORT |
| 27-59512 | Double Wall Injection Line #1 & #2 HPCR (Marked #1) |
| 27-59534 | Double Wall Injection Line #3 & #4 HPCR (Marked #2) |
| 27-59656 | Double Wall Injection Line #5 & #6 HPCR (MARKED #3) HPCR |
| 27-59620 | Tube,Fuel Return-to-Alarm Tank |
| 19M8162 | CS,HX HD FLANGED M10x1.5 X 40mm Grade 10.9 DIN Code 6921-10ZY |
| R121043 | VALVE,OIL BYPASS |
| 18-29601 | HOSE 2-3/4"ID X 3" 3 PLY SILICONE |
| 18-11010 | Hose 3/4"ID X 4-1/4" 3-Ply Silicone |
| R119874 | BUSHING |
| R51936 | SEALING SLEEVE 1/4"OD TUBE (White Stripe) |
| RE516228 | PISTON & LINER KIT (Piston Marked RE507758) |
| R502755 | PISTON PIN |
| RE505941 | CRANKSHAFT PULLEY/DAMPER 188mmOD |
| RE519730 | FUEL INJECTOR,ELECTRONIC UNIT TYPE M1064H @ 1500RPM & L-M1066H - NL1066H4 ALL (CORE CREDIT VALUE $75.00) |
| 24-09501 | Oil Filter 1064 & 1066 (6ea Per Case) |
| R116031 | O-RING |
| 33-81014 | Hydrolastic Mount 600LBS |
| R524497 | GASKET,ROCKER ARM COVER MTG L-M1066A & H |
| 11-31012 | Gasket,Turbo Oil Return |
| R48685 | DOWEL PIN |
| 11-31031 | Gasket,Turbo Oil Return |
| R55453 | O-RING |
| 11-31096 | Gasket,Exhaust 5" 150 LB Flange |
| RE516335 | VALVE,PRESSURE RELIEF HPCR |
| 11-11013 | Gasket,Thermostat Cover Mtg |
| 11-11023 | Gasket,Expansion Tank-to-Exhaust Manifold |
| 35-12500 | Thermostat 169F / 76C 52mm OD S/S (Rubber Poppet Seat) |
| 11-11043 | Gasket,Heat Exchanger / Keel Cooler Outlet connection |
| R502512 | SLEEVE |
| RE538097 | SEAL,FRONT CRANKSHAFT 4 & 6 CYL POWERTECH (JDG954B INSTALLATION TOOL REQ'D) |
| 18-62520 | Hose 1-3/4"ID X 3-3/4" 3-Ply Silcone |
| R504781 | CAP SCREW M8 X 1.25 X 35MM |
| 20-19504W | Heat Exchanger Assembly,CU-NI White L-M1064A-H & L-M1066A-H |
| 41-01112 | Hose 2"ID 4-Ply Silicone SAE J20R1 Class A -65F/+350F |
| 11-31615 | Gasket,Turbocharger / Exhaust Outlet Mtg |
| 11-31635 | GASKET,TURBO EXHAUST OUTLET (K27) |
| R63185 | O-RING |
| AT13740 | DRAIN COCK,BRASS + STEEL HANDLE 1/4NPT (CLOCKWISE-TO-OPEN) |
| RE516491 | ROCKER ARM SHAFT |
| 16-72020 | O-RING 1.48"ID X 0.12" 90 DUROMETER NITRILE (SAE J515 TYPE CH) |
| 24-21000 | Air Filter 8"OD X 8-3/4" (10-3/4"LOA)- 4-1/8"OD X 2" Outlet |
| RE546906 | COOLANT PUMP,CAST IRON (HIGH FLOW) 668 - 1064H - 1066 |
| 40-09503 | Drive Belt,Micro-V 28mm X 1674mm |
| R61105 | O-RING 1-1/2"ID X 1/8" 75 Durometer Viton |
| R534091 | CAPSCREW HEX HEAD FLANGED 1/2-13 X 5.43" SPECIAL |
| 35-11000 | Thermostat 180F / 82C 52mm OD S/S (Rubber Poppet Seat) |
| R115390 | BUSHING |
| 11-30013 | Gasket,Exhaust Manifold Adapter Mtg |
| 24-51008 | Element,Fuel filter 2 Micron with Plastic Drain Valve 6" L-M1066H HPCR System |
| 24-51009 | Element,Water Separator 30 Micron Reverse Flow 6" with Plastic Drain Valve L-M1066H & NL1066H4 HPCR System |
| 16-01000 | O-Ring 3/4"ID X 3/32" Nitrile |
| R54114 | SNAP RING 1.80"OD (FREE) X 0.062" |
| 11-10015 | Sealing Ring, Thermostat |
| 21-10000 | PLUG,HX HD,BRS.1/2NPT x 7/16-14 (ZINC HOLDER) |
| 21-10002 | Drain Cock,Brass 1/4NPT (Counterclockwise-to-Open) |
| 21-10010 | Zinc Anode 5/8"OD X 2" X 7/16-14 Thread |
| DZ100057 | OIL PUMP ASSEMBLY 4.5 & 6.8 POWERTECH TIER 1 & 2 |
| RE560754 | OIL COOLER |
| 16-13101 | O-Ring 2-1/2"ID X 1/8" Nitrile |
| 16-15005 | O-Ring 1/2"ID X 3/32" Nitrile |
| 16-15006 | O-Ring 1-1/8"ID X 3/16" Nitrile |
| 14-00818 | Hex Nut M10x1.5 S/S 8-18 (15mm Hex) |
| 24-20029 | Element, Crankase Breather Filter (Low restriction, Aluminum Open ) CCV4500 |
| R535366 | GASKET, ROCKER ARM COVER |
| DZ116644 | GASKET,OIL PAN MTG |
| 16-31001 | O-Ring 1-7/8"ID X 3/16" Viton |
| 16-14804 | O-Ring 2"ID X 1/8" Nitrile |
| 16-25701 | O-RING 2-7/8"ID X 3/16" VITON |
| 15-55701 | SEALING WASHER,BONDED 1/8BSPP |
| 18-26002 | Hose 2"ID X 3-3/4" 4-Ply Silicone J20R1 Class A To 350F |
| 22-40277 | Alternator 24V/75A Isolated Ground Large Frame (with Adjustable Regulator) |
| R111137 | SPRING |
| R123226 | TUBE SEAL,COOLANT BYPASS |
| 37-16802 | Flow Switch,Bronze 25 GPM 2"NPT |
| R123417 | GASKET,COOLANT PUMP MTG |
| 16-19502 | O-Ring 7/16"ID X 3/16" Nitrile |
| R120467 | Elbow 90 Degree 3/4"HB (w/o O-Ring) Vent Outlet |
| 11-79501 | Gasket,Oil Filler Neck & Block-Off Plate Mtg |
| R135918 | CS,HX HD FLANGED M12x1.75 X 40mm GRADE 10.9 |
| 16-19503 | O-Ring 4-1/4"ID X 3/32" Nitrile |
| R501428 | GASKET,OIL COOLER COVER |
| 24-20016 | Element, Crankcase Breather Filter (High restriction, High density ) CCV4500 |
| R501484 | GASKET,OIL FILTER ADAPTER MTG |
| 32-00005 | Cotter Pin S/S 1/8" X 1-1/4" ANSI B18.8.1-R1977 |
| 19-01012 | Hose Clamp #12 Extended Band S/S (316) 7/8" Min X 1-1/4" Max |
| 19-01028 | Hose Clamp #28 Extended Band S/S (316) 1-5/16" Min X 2-1/4" Max |
| 15-70007 | Snubbing Washer S/S (304) 0.375"ID X 0.875"OD X 0.060" |
| 15-19504 | Washer,Neoprene 0.390"ID X 0.865"OD X 0.062" |
| R47154 | O-RING |
| 11-15704 | Gasket,Turbine Housing Coolant Port (Block-Off Plate / Port Adapter Mtg) |
| R116516 | HEAD GASKET 668 POWERTECH |
| 16-09501 | O-Ring 19.3mmID X 2.2mm 90 Durometer Nitrile (ISO 6149 Port) |
| RE65908 | ROD BEARING,STD |
| 27-59604 | INJECTION LINE #4 DOUBLE WALL (MARKED #3) |
| R500271 | O-Ring 8.1mmID X 1.6mm 90 Durometer Nitrile (ISO 6149 Port) |
| RE508566 | S/S INSERT 4045-6068 POWERTECH TIMING COVER |
| R61467 | O-RING, CAMSHAFT |
| 22-49508 | Starter 24V 7.8kW Isolated Ground L.H. 3-Bolt SAE Type #1 Mount |
| R123501 | GASKET,OIL COOLER |
| T122075 | O-RING 1-3/8" X 3/32" NITRILE |
| 51M7042 | O-RING 13.3mmID X 2.2mm 90 DUROMETER NITRILE (ISO 6149-1 PORT) |
| RE65165 | MAIN BEARING KIT,STD |
| RE65168 | THRUST BEARING KIT,STD |
| RE505501 | VALVE,OIL PRESSURE REGULATING |
| R501124 | BOLT, CONNECTING ROD |
| 14M7066 | NUT |
| 27-19510 | Tube,Heat Exchanger Inlet S/S (316L) 2"HB X 2"HB L-M1064H & L-M1066H |
| 19-01048 | Hose Clamp #48 Extended Band S/S (316) 2-9/16" Min X 3-1/2" Max |
| 16-09601 | O-RING 17"ID X 1/8" VITON |
| 16-09504 | O-Ring 7-1/2"ID X 1/8" Viton |
| 19M7811 | CS,HX HD FLANGED M10x1.5 X 90mm GRADE 10.9 DIN CODE 6921-10ZY |
| 19-01032 | Hose Clamp #32 Extended Band S/S (316) 1-9/16" Min X 2-1/2" Max |
| 11-39502 | Gasket,Coolant Port Adapter Mtg |
| 25-19522 | Raw Water Pump & Adapter Assy |
| RE57604 | CRANKSHAFT DAMPER,VISCOUS L1166A - M1166AR - M1166AMCA |
| R515030 | GASKET,INTAKE MANIFOLD 1066 4V |
| R517237 | WASHER |
| R516648 | CS,HX HD M20x2.5 X 70mm GRADE 12.9 UNPLATED |
| R123565 | FOLLOWER |
| 30-30027 | Turbocharger K27 |
| 21-09703 | Sealing Sleeve 3/8"OD Tube Viton (Red Stripe) |
| 29-09602 | Gasket Set,Engine Overhaul L-M1066H (Non-Returnable If Opened) |
| RE518097 | AUTOMATIC BELT TENSIONER ASSEMBLY (see Application Comments) |
| 27-19517 | Tube,Flow Switch Inlet S/S 2"HB X 9-1/2" (1-7/64" Offset S-Bend) |
| R114082 | BUSHING |
| 18-29502 | HOSE 2"ID X 3-1/2" 4 PLY SILICONE |