Part Number: R73139
VALVE
item weight 0.080 lbs
$71.72
Items Often Purchased with this Item:
| Part Number | Description |
|---|---|
| 18-11010 | Hose 3/4"ID X 4-1/4" 3-Ply Silicone |
| 18-11025 | HOSE,ENGINE COOLANT INLET (WITH INNER SPRING LINER) |
| R51936 | SEALING SLEEVE 1/4"OD TUBE (White Stripe) |
| AR101549 | COOLANT PUMP SEAL KIT |
| AR63351 | PRESS RELIEF VALVE |
| R47151 | O-RING |
| R54826 | HOSE, OIL COOLER 90 DEG 3/4"ID MOLDED |
| 11-31011 | Gasket,Exhaust Outlet |
| 11-31012 | Gasket,Turbo Oil Return |
| R48685 | DOWEL PIN |
| 11-31031 | Gasket,Turbo Oil Return |
| RE12820 | Crankshaft Damper / Pulley |
| 22-40915 | Switch,Pressure 15PSI N.O./ N.C. 1/8NPT |
| 22-40925 | SWITCH,TEMPERATURE 215F 1/2NPT ISO GROUND |
| R85363 | CS,FLANGED HEAD 1/2-13 X 4.41" SPECIAL-MARKED E112 |
| 11-21011 | Gasket,Intake Port |
| 24-00000 | OIL FILTER 4239-439-4276-445-6414-668 (12 PER CASE) |
| 30-31430 | REPAIR KIT,K-26 TURBO (30-31426, 30-21400 & 30-39400) |
| 11-11013 | Gasket,Thermostat Cover Mtg |
| 11-11023 | Gasket,Expansion Tank-to-Exhaust Manifold |
| 11-11043 | Gasket,Heat Exchanger / Keel Cooler Outlet connection |
| H35244 | O-RING |
| 11-31401 | Gasket,K26 Turbocharger Mounting (with Coolant Passage Penetrations) |
| 37-40010 | Oil Pressure Gauge 0-80 PSI / 5 Bar 12V Black Bezel Cockpit International |
| R98489 | GASKET |
| R75728 | GASKET,ROCKER ARM COVER MTG |
| T20034 | BUSHING |
| T20046 | SLINGER OIL |
| T27658 | SPRING,OIL PRESSURE RELIEF |
| T20072 | PLATE |
| T20243 | GASKET,COOLANT PUMP-TO-CYLINDER-BLOCK |
| 11-11611 | Gasket,Square Coolant Port - 80 Durometer SBR (Red) - see Application Comments |
| 16-72020 | O-RING 1.48"ID X 0.12" 90 DUROMETER NITRILE (SAE J515 TYPE CH) |
| 24-21000 | Air Filter 8"OD X 8-3/4" (10-3/4"LOA)- 4-1/8"OD X 2" Outlet |
| T20328 | GASKET, OIL FILLER CAP |
| 11-01601 | GASKET,OIL FILTER ADAPTER MTG |
| AR97517 | BEARING, ROD |
| 35-11000 | Thermostat 180F / 82C 52mm OD S/S (Rubber Poppet Seat) |
| 25-11023 | Seal,Single Lip Type (Marked 16287) |
| 25-11024 | O-Ring |
| 25-11031 | IMPELLER |
| 25-11032 | Gasket,Raw Water Pump Cover (4-Hole) |
| R56192 | O-RING |
| R56193 | O-RING |
| 25-11034 | Ball Bearing 17mmID X 40mmOD X 12mm Single Row Deep Groove Double Shielded |
| 25-11037 | CAM,S.W.PUMP JOHNSON |
| T13213 | WASHER |
| 20-12522 | Gasket 5" Rubber - Heat Exchanger End Cover Seal (w/o Perforations for Zincs) |
| 11-30013 | Gasket,Exhaust Manifold Adapter Mtg |
| R56461 | O-RING |
| R74195 | BOLT, ROD |
| 16-01000 | O-Ring 3/4"ID X 3/32" Nitrile |
| JD8643 | COOLANT PUMP SHAFT & BEARING ASSEMBLY |
| R26286 | O-RING 0.414"ID X 0.072" 90 DUROMETER NITRILE (SAE J515 TYPE CH) |
| 11-10015 | Sealing Ring, Thermostat |
| 21-10000 | PLUG,HX HD,BRS.1/2NPT x 7/16-14 (ZINC HOLDER) |
| AR67942 | CRANKSHAFT SEAL,FRONT |
| 21-10007 | Filler Cap 7PSI Single Seal or Double Seal - Open System Type |
| R81989 | SLEEVE |
| 21-10010 | Zinc Anode 5/8"OD X 2" X 7/16-14 Thread |
| A4827R | WASHER |
| T26321 | BUSHING |
| T26326 | WASHER |
| 18-21016 | Hose 2"ID X 1-3/4" 3-Ply Silicone |
| R61871 | O-RING |
| R56809 | GASKET,COOLANT PUMP MTG |
| R56812 | IMPELLER (CIRC PUMP) |
| R79605 | SLEEVE |
| R79606 | TEE,BRASS |
| 24H1290 | WASHER 21/64 X 3/4 X .036 |
| RE31286 | OIL COOLER |
| DZ10684 | GASKET,OIL PAN MTG. |
| R10093 | O-RING |
| R80632 | O-RING |
| RE42211 | FUEL TRANSFER PUMP |
| R97352 | GASKET |
| RE38087 | INJECTOR 4039T-4045-6068 |
| R91889 | VALVE KEEPERS |
| R98062 | INTAKE VALVE STD. |
| RE31617 | SEALS |
| R98484 | GASKET,UP OIL COOLER COVE |
| R91360 | NUT M14 |
| R89944 | O-RING |
| R98485 | GASKET,LOWER OIL COOLER COVER |
| RE53073 | LINER KIT (NO PISTON PINS-OR CIRCLIPS) |
| R109086 | SPACER |
| R98471 | GASKET |
| 11-51001 | GASKET |
| R114157 | HEAD GASKET 6 CYL |
| R46625 | SPRING |
| R97185 | O-RING 5/8"ID X 1/8" NITRILE |
| RE63913 | BUSHING KIT (PIN & CIRCLIPS INCLUDED) |
| RE505501 | VALVE,OIL PRESSURE REGULATING |
| R520618 | GASKET, FUEL LIFT PUMP MTG |