Part Number: 27-59604
INJECTION LINE #4 DOUBLE WALL (MARKED #3)
item weight .420 lbs
$1,072.54
Items Often Purchased with this Item:
| Part Number | Description |
|---|---|
| RE507959 | INJECTION PUMP,HPCR 1064/1066 CORE CREDIT VALUE $400.00) |
| 27-59512 | Double Wall Injection Line #1 & #2 HPCR (Marked #1) |
| 27-59534 | Double Wall Injection Line #3 & #4 HPCR (Marked #2) |
| 27-59656 | Double Wall Injection Line #5 & #6 HPCR (MARKED #3) HPCR |
| 27-59620 | Tube,Fuel Return-to-Alarm Tank |
| 19M8162 | CS,HX HD FLANGED M10x1.5 X 40mm Grade 10.9 DIN Code 6921-10ZY |
| 27-19611 | Tube Assy,Turbo Coolant Supply |
| 18-59512 | Hose Assy 1/4"ID X 12" 8mm90 DKO Swivel X 8mm Light Standpipe S/S-TFE - see Application Comments |
| 18-59513 | Hose Assy 1/4"ID X 13" 8mm90 DKO Swivel X 3/8FMS S/S-TFE |
| 27-39613 | TUBE ASSY,TURBO OIL SUPPLY (WITH DUPLEX OIL FILTER) |
| 18-29601 | HOSE 2-3/4"ID X 3" 3 PLY SILICONE |
| 18-11010 | Hose 3/4"ID X 4-1/4" 3-Ply Silicone |
| R114193 | BUSHING |
| 111996470 | GASKET,ROCKER ARM COVER 673 TIER 2 & 3 |
| RE516228 | PISTON & LINER KIT (Piston Marked RE507758) |
| R502755 | PISTON PIN |
| RE505941 | CRANKSHAFT PULLEY/DAMPER 188mmOD |
| RE503664 | IDLER SHAFT & BEARING HOUSING ASSY HD - IRON (HSG MARKED R502014) |
| RE519730 | FUEL INJECTOR,ELECTRONIC UNIT TYPE M1064H @ 1500RPM & L-M1066H - NL1066H4 ALL |
| R515044 | NUT,INJECTION LINE CONNECTION |
| 33-81013 | Hydrolastic Mount 500 LBS |
| 33-81014 | Hydrolastic Mount 600LBS |
| 22-40904 | Switch,Temperature 205F N.O./ N.C. Isolated Ground 1/2NPT 3ea #8-32 Terminals |
| 18-59616 | HOSE ASSY 5/16"ID X 34" 3/8FMS X 3/8FMS USCG A-1 SAE J1942 ABS |
| 18-59617 | HOSE ASSY 3/16"ID X 32" 1/4FMS X 1/4FMS USCG A-1 SAE J1942 ABS |
| 22-41079 | Solenoid 24VDC 85A N.O. Isolated Ground |
| RE516335 | VALVE,PRESSURE RELIEF HPCR |
| 35-12500 | Thermostat 169F / 76C 52mm OD S/S (Rubber Poppet Seat) |
| R521458 | BOLT,ROCKER ARM RETAINING (TAPPED M8x1.25) |
| 22-40536 | Switch,Pressure 9PSI N.O./ N.C. Isolated Ground 1/8NPT |
| RE509093 | WIRE HARNESS ASSY,HPCR FUEL INJECTOR CIRCUIT 12-PIN 6-CYL |
| R502512 | SLEEVE |
| R114194 | SHAFT |
| RE508489 | GEAR |
| R504843 | SHAFT |
| 18-62520 | Hose 1-3/4"ID X 3-3/4" 3-Ply Silcone |
| 37-16812 | Bonnet Assembly 25 GPM Set Point 2" Flow Switch - see Application Comments |
| T20168 | WASHER |
| 22-40941 | Switch,Temperature 195F N.O./ N.C. Isolated Ground 3/8NPT (3ea #8-32 Terminals) |
| 24-21000 | Air Filter 8"OD X 8-3/4" (10-3/4"LOA)- 4-1/8"OD X 2" Outlet |
| R528387 | CAPSCREW HEX HEAD FLANGED 1/2-13 X 3-3/4" SPECIAL |
| RE546906 | COOLANT PUMP,CAST IRON (HIGH FLOW) 668 - 1064H - 1066 |
| R516140 | STRAP |
| 22-40963 | Switch,Pressure 15PSI N.O./ N.C. 1/8NPT 10A Contacts |
| R534091 | CAPSCREW HEX HEAD FLANGED 1/2-13 X 5.43" SPECIAL |
| RE553419 | CYLINDER HEAD ASSEMBLY L-M1066H AND NL1066H4 See Application Comments |
| 35-11000 | Thermostat 180F / 82C 52mm OD S/S (Rubber Poppet Seat) |
| 24-51008 | Element,Fuel filter 2 Micron with Plastic Drain Valve 6" L-M1066H HPCR System |
| R54114 | SNAP RING 1.80"OD (FREE) X 0.062" |
| R28811 | FLYWHEEL RING GEAR SAE#11-1/2 & SAE#14 (129 TEETH) |
| DZ100057 | OIL PUMP ASSEMBLY 4.5 & 6.8 POWERTECH TIER 1 & 2 |
| RE560754 | OIL COOLER |
| 18-21003 | Hump Hose 4" X 2-3/4" X 4"LOA with 5/8"ID Vent Hole |
| 22-40710 | Relay SPDT 24VDC 20A (Suppression w/ Resistor) |
| 22-42802 | Sender,Temperature 250F Isolated Ground 1/2NPT |
| 22-42803 | Sender,Pressure 0-80 PSI Isolated Ground 1/8NPT (Marked 32/1) |
| 24-20029 | Element, Crankase Breather Filter (Low restriction, Aluminum Open ) CCV4500 |
| DZ111102 | PUSH ROD |
| DZ117587 | FUEL LIFT PUMP ASSY (W/O FITTINGS) 1064-1066 HPCR SYSTEMS |
| DZ118906 | CAMSHAFT ASSEMBLY |
| 16-14804 | O-Ring 2"ID X 1/8" Nitrile |
| 24-05701 | Oil Filter L-M-NL6108 & All NLI Models built with Integrated Duplex Oil Filter (12ea per Case) |
| 18-75701 | Hose Assy 1/2"ID X 32" 1/2FMS X 1/2FMS |
| 15-55701 | SEALING WASHER,BONDED 1/8BSPP |
| 198586050 | KIT, BEARING 3 CYL (CONSIST OF 198517242 3 pcs & 198517232 3 pcs) |
| RE515636 | RESTRICTOR |
| 22-40277 | Alternator 24V/75A Isolated Ground Large Frame (with Adjustable Regulator) |
| 10-51602 | DRAIN MANIFOLD M668D-T (STANADYNE PUMP MOUNTED) |
| 18-70004 | HOSE ASSY 3/8"ID X 7" 3/8FMS X 3/8FMS S/S-TFE |
| 22-40357 | Switch,Pressure 25PSI N.O./ N.C. 10A Contacts 1/8NPT |
| 18-55405 | Hose Assy 1/4"ID X 9" (9.5"LOA) 1/4FMS X 1/4FMS S/S-TFE |
| R120467 | Elbow 90 Degree 3/4"HB (w/o O-Ring) Vent Outlet |
| R135918 | CS,HX HD FLANGED M12x1.75 X 40mm GRADE 10.9 |
| 22-40377 | Relay 24VDC 6A SPDT DIN Rail Mtg |
| 16-19503 | O-Ring 4-1/4"ID X 3/32" Nitrile |
| 32-00005 | Cotter Pin S/S 1/8" X 1-1/4" ANSI B18.8.1-R1977 |
| 19-01012 | Hose Clamp #12 Extended Band S/S (316) 7/8" Min X 1-1/4" Max |
| 19-01028 | Hose Clamp #28 Extended Band S/S (316) 1-5/16" Min X 2-1/4" Max |
| 15-70007 | Snubbing Washer S/S (304) 0.375"ID X 0.875"OD X 0.060" |
| 15-19504 | Washer,Neoprene 0.390"ID X 0.865"OD X 0.062" |
| 21-12013 | Filler Cap 7PSI Double Seal Coolant Recovery Type |
| 16-00005 | O-Ring 11.3mmID X 2.2mm 90 Durometer Nitrile (ISO 6149 Port) |
| 16-09502 | O-RING 0.614"ID X 0.070" 90 DUROMETER NITRILE (SAE J515 TYPE CH) |
| 20-49504 | Thermostat & Probe Y-Harness Assembly 240VAC 80F On / 100F Off (1/2" NPT) |
| RE65908 | ROD BEARING,STD |
| 27-59601 | INJECTION LINE #1 DOUBLE WALL (MARKED #6) |
| 27-59602 | INJECTION LINE #2 DOUBLE WALL (MARKED #5) |
| 27-59603 | INJECTION LINE #3 DOUBLE WALL (MARKED #4) |
| 27-59605 | INJECTION LINE #5 DOUBLE WALL (MARKED #2) |
| 27-59606 | INJECTION LINE #6 DOUBLE WALL (MARKED #1) |
| 22-40408 | Timer Module 24VDC 20A N.O. 20 Second Delay (One-Shot Operation) |
| 24-28602 | Element,Air Filter (Foam 10 PPI Reticulated Polyether) M773 |
| R61467 | O-RING, CAMSHAFT |
| 21-59504 | BANJO BOLT M8x0.75 X 16mm |
| 22-40914 | Switch,Temperature 240F N.O./ N.C. Isolated Ground 3/8NPT |
| 22-40438 | Speed Switch 2-Element Electric SS40A (Programming Req'd) |
| RE65165 | MAIN BEARING KIT,STD |
| RE65168 | THRUST BEARING KIT,STD |
| 22-40439 | Speed Sensor 3/4-16 X 2-1/4" (Metri-Pak 150.2 Connector) |
| RE505501 | VALVE,OIL PRESSURE REGULATING |
| R501124 | BOLT, CONNECTING ROD |
| 14M7066 | NUT |
| 25-19519 | Raw Water Pump |
| 27-19510 | Tube,Heat Exchanger Inlet S/S (316L) 2"HB X 2"HB L-M1064H & L-M1066H |
| 19-01048 | Hose Clamp #48 Extended Band S/S (316) 2-9/16" Min X 3-1/2" Max |
| 19M7811 | CS,HX HD FLANGED M10x1.5 X 90mm GRADE 10.9 DIN CODE 6921-10ZY |
| 19-01032 | Hose Clamp #32 Extended Band S/S (316) 1-9/16" Min X 2-1/2" Max |
| 27-59608 | TUBE ASSY,FUEL LIFT PUMP OUTLET |
| 27-19511 | Tube,Coolant Pump Inlet (4-Valve SWAC Models) |
| RE167207 | SENSOR,OIL & FUEL PRESSURE |
| 27-19512 | Tube Assy,Coolant Bypass |
| RE57604 | CRANKSHAFT DAMPER,VISCOUS L1166A - M1166AR - M1166AMCA |
| RE52722 | SENSOR,COOLANT TEMPERATURE M14x1.5 - Probe = 7.8mmOD x 14mm (from thread stop) Metri-Pak 150.2 Connector - see Application Comments |
| R517237 | WASHER |
| R516648 | CS,HX HD M20x2.5 X 70mm GRADE 12.9 UNPLATED |
| R123565 | FOLLOWER |
| RE61812 | SENSOR,AIR INLET TEMPERATURE M14x1.5 - Probe = 7.8mmOD x 14mm (from thread stop) Metri-Pak 150.2 Connector -see Application Comments |
| RE519144 | Speed Sensor M20x1.5 X 36mm Probe Length (Metri-Pak 150.2 Connector) |
| 27-59503 | Tube Assy,Fuel Return |
| 21-09703 | Sealing Sleeve 3/8"OD Tube Viton (Red Stripe) |
| 29-09602 | Gasket Set,Engine Overhaul L-M1066H (Non-Returnable If Opened) |
| 27-39607 | Tube Assy,Turbo Coolant Return |
| RE518097 | AUTOMATIC BELT TENSIONER ASSEMBLY (see Application Comments) |
| 27-19517 | Tube,Flow Switch Inlet S/S 2"HB X 9-1/2" (1-7/64" Offset S-Bend) |
| R114082 | BUSHING |
| 18-09604 | Hose Assy 1/2"ID X 31" 5/8 O-R Face Seal X 5/8 O-R Face Seal |
| 18-09605 | Hose Assy 1/2"ID X 34" 5/8 O-R Face Seal 90 X 5/8 O-R Face Seal |
| R518210 | SPACER,TENSIONER MTG |
| 18-29502 | HOSE 2"ID X 3-1/2" 4 PLY SILICONE |